Winterhalter UC-XL Operations Instructions Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
Malfunctions
19
9.1 Error code call
In the display, the following symbol flashes
Tap the row next to the following buttons
The error codes are displayed in area (a).
INFO Malfunctions already resolved are also displayed
here (e.g. ERR 1 OK).
Contact an authorised service technician for the repair.
Press the button (b) twice to leave the Menu.
9.2 Poor cleaning result
Possible Cause Remedy
The dishes do not get clean
No or excessively low detergent
dosing
Set the dosing amount as per the manu-
facturer’s specifications ( 12.6)
Check the dosing lines (for kinks, break-
age, ...)
Exchange the storage container, if empty
Dishes incorrectly sorted Do not stack dishes one over the other
Nozzles of the wash arms
blocked
Remove the wash arms and clean the
nozzles ( 8.2)
Excessively low temperatures Test the temperatures ( 10)
There is formation of layers on
the dishes
In case of grease residues:
The water is too hard
Check the water preparation
Clean thoroughly
In case of starch residues:
Temperature of the manual pre-
cleaning (brush) is higher than
30 °C
Lower the temperature of the manual pre-
cleaning
Carry out the basic cleaning program
( 12.5.2)
The dishes do not dry on their
own
No or excessively low rinse aid
dosing
Set the dosing amount as per the manu-
facturer’s specifications ( 12.6)
Check the dosing lines (for kinks, break-
age, ...)
Exchange the storage container, if empty
Water intake pressure too low
Contact an authorised service technician
for the repair
For machines without integral softener:
INFO The water quality affects the washing and drying performance. We therefore recommend from a
total hardness of more than 3° dH (0.53 mmol/l) that the machine is supplied with softened water.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Comments to this Manuals

No comments